Menu
Looking for insulation in Riverside, CT? Cloud9 Spray Foam is Riverside’s trusted insulation contractor specializing in spray foam, the most effective insulation solution available for Greenwich’s most established neighborhood. From early 20th century colonials and Tudors to mid-century homes and newer builds, Riverside’s diverse housing stock demands an insulation product that performs under real conditions.
We’re OSHA30 and BPI certified, and we use the newest computer-controlled equipment in the industry. No-charge inspections. Free estimates. Real results.
Most of Riverside’s homes were built between 1940 and 1969 — long before today’s energy codes existed. That means decades of accumulated air leakage, settled framing, and insulation that has long since lost its effectiveness. Connecticut’s hot summers, cold winters, and coastal humidity make that gap between what your home should perform and what it actually does even wider.
Spray foam closes that gap. It expands on contact to seal every crack, seam, and cavity that older construction is full of, creating a thermal barrier that holds up season after season and delivers real, measurable savings on every utility bill.
Spray foam is a high-impact investment that pays for itself through reduced utility costs and increased home value. While the federal 25C tax credit expired at the end of 2025, 2026 brings significant local opportunity. As a participating Energize CT contractor, Cloud9 helps Riverside homeowners access the increased $2.00 per square foot rebate up to $10,000 per home for professionally installed insulation.
Local FAQ: Q: Is spray foam the right choice for Riverside’s older colonials and Tudors?
A: Yes, and it is actually one of the best applications for it. Older colonial and Tudor construction in Riverside is characterized by irregular framing, balloon frame wall assemblies, and hidden air channels that fiberglass batts were never designed to address. Spray foam expands into all of it, meeting 2026 R-60 attic standards and delivering the kind of performance these homes were never built with originally.
Spray foam is applied as a liquid that immediately expands to fill every gap, seam, and cavity other insulation products miss. Once cured it forms a permanent thermal and air barrier inside your walls, attic, and foundation areas that your home benefits from for decades.
With the building envelope properly sealed, your HVAC system stops fighting against constant air leakage. Temperatures stabilize across every room and floor, equipment runs less, and energy costs drop in a way that cheaper insulation products simply cannot replicate.
Before Closed Cell Spray Foam
Closed cell spray foam delivers the highest R-value per inch of any insulation on the market while forming a rigid moisture resistant barrier. In Riverside homes it is most commonly installed in crawl spaces, basements, attics, rim joists, garage walls, and open wall cavities during renovation projects.
For Riverside’s older homes in particular, many of which have unfinished basements, stone foundations, and irregular framing that has shifted over decades, closed cell foam’s expansion properties make it the only product that reliably addresses every air leakage point in a single installation.
.
After Closed Cell Spray Foam
– Controls Moisture and Prevents Mold High-density Closed Cell foam creates a seamless FEMA-approved vapor barrier in crawl spaces and basements. Riverside’s proximity to Long Island Sound means humidity levels stay elevated throughout the year, and that moisture works its way into foundations and crawl spaces over time. Closed cell foam stops it at the source before it becomes a mold problem inside your home’s structure.
– Air-Seals Additions for Year-Round Comfort Many of Riverside’s well established homes have seen additions and renovations over the decades. Every addition creates a potential weak point in your home’s thermal envelope. Open Cell or Closed Cell foam seals those spaces fully into the rest of the home, eliminating temperature disconnects and meeting 2026 energy codes. This work qualifies for the $2.00 per square foot Energize CT rebate on existing walls.
– Upgrades Riverside’s Older Colonials, Tudors, and Cottages Riverside’s most established homes were built in an era when air sealing was not a priority. Spray foam expands into the irregular gaps and settled framing common in these properties, stopping the chimney effect that silently pulls conditioned air out of the home every single day. We regularly pair it with Rockwool for added fire-blocking and soundproofing between floors.
– Insulates Rim Joists and Eliminates Cold Floors The rim joist is consistently the leakiest part of an older home and Riverside is no exception. Sealing it with Closed Cell spray foam stops cold air infiltration permanently, one of the fastest and most cost-effective 2026 upgrades available, and it counts toward the $10,000 state rebate cap.
Every job uses premium NCFI Polyurethanes chemicals, the same manufacturer that has partnered with NASA for over 40 years. The quality of what goes into your home is never something we compromise on.
Our computer-controlled chemical proportioners maintain a precise 1:1 mix ratio, which is critical for foam that cures fully and safely. Every customer receives a production quality report, a documented record of exactly what was installed in their home.
OSHA, Building Performance Institute and Energize CT trained and certified professionals.
Members of Energize CT/ Connecticut Insulation Installers Network
We bring expertise and verified safety standards to every Riverside job site.
Cloud9 Spray Foam serves homeowners throughout Riverside and the surrounding Greenwich communities of Old Greenwich, Cos Cob, and the backcountry, as well as neighboring towns including Stamford and Darien. Our team understands the specific construction styles and climate conditions that define homes in this part of Fairfield County and brings that local knowledge to every project.
Whether you are upgrading insulation in an older colonial, finishing a basement renovation, or improving a newer home’s overall energy performance, our experienced installers deliver results you can feel immediately and measure on your next utility bill.
As Riverside’s trusted insulation contractor, we specialize in spray foam but also install fiberglass, mineral wool, and cellulose insulation to find the right solution for every area of your home.
Spray foam is not a product that rewards shortcuts. Correct chemical ratio, appropriate thickness, and full coverage across every target area all require certified professionals with calibrated equipment. Our installers follow strict industry best practices on every job, ensuring long-term performance, compliance with local building codes, and full protection of your investment.
A properly installed spray foam job is one of the few home upgrades that keeps delivering value for the entire life of the structure
How long does spray foam installation take? Most residential projects are complete within 1 to 2 days. We will give you a precise timeline during your free inspection based on your home’s specific scope.
Do I need to leave my home during installation? Yes. The home cannot be occupied during the job or for 24 hours afterward. This allows the foam to fully cure and the space to ventilate properly. We walk every homeowner through the process before we begin.
How much does spray foam cost? Every home is different. We provide free detailed estimates tailored to your specific project. Spray foam costs more upfront than fiberglass but the long-term energy savings and performance make it the right investment for most homeowners.
What’s the difference between open-cell and closed-cell spray foam? Closed cell is four times denser than open cell, has double the R-value per inch, and is the only correct product for moisture-prone areas like basements and crawl spaces. Open cell is lighter, more affordable, and the superior choice for sound dampening and hard-to-reach dry spaces. We will always recommend the right product for each specific area of your home.
Do you offer financing? Yes. We work with financing partners to make insulation upgrades accessible for every budget. Ask us about options during your consultation.
What happens if my home has knob and tube wiring? Homes with knob and tube wiring must provide an electrician clearance before insulation can be installed under the Energize CT program.
Are you licensed and insured? Absolutely. Fully licensed, insured, OSHA30 and BPI certified. Your home and your family are fully protected.
Why is spray foam the best insulation for Riverside homes? Riverside’s older housing stock, established construction styles, and Connecticut’s coastal climate create a combination that traditional insulation was never built to handle long term. Spray foam seals air and manages moisture in a single application, outperforming every other product in the areas that matter most for homes built between 1940 and 1969.
Ready to bring your Riverside home up to the performance standard it deserves? We offer no-charge inspections and free estimates with honest pricing and no pressure
Whether you’re dealing with:
– High energy bills
– Uncomfortable rooms or uneven rooms
– A new addition that needs proper insulation
– Moisture problems in your crawl space or basement
– A renovation where walls or ceilings already open
…we can help.
Spray Foam Insulation • Attic Insulation • Crawl Space Insulation • Rim Joist Insulation • Wall Insulation
© Cloud9Home Performance Insulation 2026